Mô tả ngắn

Hãng sản xuất: Kruss

Analyzing jetted drops for precision printing

The all-important cooperation between the ink and the print head control creates high quality inkjet printing. The DSA Inkjet Drop Shape Analyzer supports you in reaching this goal. The instrument incorporates an innovative Drop Watching system for analyzing the jet stream of ink droplets produced by the print head. Drop formation and analysis are exactly synchronized by triggering drop generation.

HỖ TRỢ NHANH

THÔNG TIN SẢN PHẨM

INSTRUMENT DIMENSIONS

Footprint 540 × 250 mm
Height 440 mm
Weight (without accessories) 10 kg

POWER SUPPLY

Voltage 88 to 264 V
Power consumption 100 W
Frequency 50 to 60 Hz

SAMPLE DIMENSIONS

Print head space 95 × ∞ × 200 mm (W × D × H)

ENVIRONMENT

Operating temperature 10 °C to 40 °C
Storage temperature -10 °C to 70 °C
Humidity without condensation

INTERFACES

PC USB 3.0

HOUSING AND PERIPHERALS

Compartment UV protected
Camera und optics housing yes
Levelling yes

SOFTWARE

Software type ADVANCE
Available software modules Inkjet
waveform editor

TIMING

Accuracy < 100 ns
Precision < 10 ns

WAVEFORM TUNING MODE

Supported print heads RICOH MH5420/5440, MH5421/5441, MH5220
Waveform adjustable in ADVANCE waveform editor
Print head safety features adjustable voltage limits
voltage slope protection
Temperature control of the print head included
Resolution of temperature control 0.1 °C

DROP WATCHER MODE

Supported print heads any
Synchronization options quadrature signal out in TTL and differential (EIA 422) form

GENERAL FEATURES

General features two-color double strobe velocity measurement
drop generation visualization
print stability evaluation

MEASUREMENT MODES

Measurement modes drop watcher mode
waveform tuning (only for supported print heads)

MEASUREMENT RANGE

Drop volume 1 to 500,000 pL
Drop speed (center, leading edge) 0 to 40 m/s
Print frequency drop on demand to 50 kHz

OPTICAL MEASUREMENT

Calibration fully automatic
Accuracy of the reference target 1 μm

ADDITIONAL FEATURES

Additional features analysis of first jetted drop
automatic drop identification
nozzle plate observation optics included
ink vapor suction device included

ADDITIONAL RESULTS

Additional results trajectory (center, leading edge)
number of drop parts
drop dimensions (horizontal/vertical)
drop position (center, leading edge)

STATISTICS

Statistics mean value & standard deviation for all results

CAMERA SYSTEM

Type color

CAMERA SYSTEM (STANDARD)

Type Camera CF04C
Connection USB 3.0
Resolution 1920 × 1200 px
Frame rate 2300 fps

ILLUMINATION

Type 2 high power monochromatic LEDs
Wave length, dominant 470 nm, 625 nm
Strobe pulse width 180 ns

OPTICS (STANDARD)

Focus fixed focus
Zoom 6.5× microscope zoom, manual
Field of view CF04C: 0.3 × 0.3 to 1.9 × 1.9 mm (3.5× to 22.5×)
Resolution of optics CF04C: 0.3 to 1.6 μm

OBSERVATION OPTICS

Focus fixed focus
Resolution CF04: 1920 × 1200 px

PRINT HEAD POSITIONING

Control x-axis: manual
y-axis: manual
z-axis: manual
tilt: manual
Range x-axis: 100 mm
y-axis: 10 mm
z-axis: 14 mm
tilt: x: 0.8° y: 0.75° z: 1.05°
  • Optimizing printing parameters and print heads in inkjet printing
  • Ink development
  • Precision improvement in 3D printing